Pioneering for You

Cement

How to reach us

+880 1716 434 153
> Send message > Contact information

Green Genesis BD

GREEN GENESIS ENGINEERING LTD.
Road 23, House 174/B
New DOHS Mohakhali
Dhaka, Bangladesh.
+88 02 8714014
+880 1933 302 535, +880 1716 434 153
sales@greengenesisbd.com
www.greengenesisbd.com

Cement

Efficient solutions for cooling heavy equipment and exhaust gases

Cement will remain the key material to satisfy global housing and modern infrastructure needs. Water is primarily used in cement production for cooling heavy equipment and exhaust gases. The average water consumption of a modern dry cement plant is between 100 and 200 litres per tonne of clinker.

Wilo pumps are ideal for industrial use

Our efficient pumps continuously circulate cooling water required for large mechanical induced-draft or forced-draft cooling towers through heat exchangers and other equipment in industrial plants where the water absorbs heat and other applications such as dust suppression, fire fighting and utility services


Vertical Turbine Pump
Vertical Turbine Pump

Design

  • Vertical wet pit
  • Stages: Single / multistage
  • Closed impeller
  • Above or below floor discharge
  • Pumped medium lubricated line
  • shaft bearings
  • Non pull out bowl/ rotating
  • element Antifriction bearings

Application

  • Water supply/ irrigation
  • Cooling water for power plant
  • Flood control/ condensate
  • extraction general industry/ fire
  • fighting

Special features / product benefits

  • Caission/ cannister construction
  • Tilted pad thrust bearings with
  • cooling arrangement, semi-open
  • impellers
  • Oil / external water lubricated line
  • shaft bearings
  • Pull out rotating element,
  • instrumentation & controls

Technical data

  • Qmax : 50000 m3 /hr max
  • Hmax: 450 m
  • Temperature: up to 800 C – higher on request
  • Delivery Size: DN 100 – DN 2000
Vertical Sump Pump
Vertical Sump Pump

Design

  • Vertical wet pit volute pump with
  • Dry motor
  • Stage: Single
  • Closed impeller
  • Oil lubricated bearing arrangement antifriction bearing
  • Mechanical seal/ gland packing

Application

  • Emergency oil pump
  • Dewatering

Special features / product benefits

Technical data

  • Qmax: 750 m3/hr
  • Hmax: 220 m
  • Temperature: up to 80°C
  • Delivery Size: DN 32 – DN 200
Sewage/Wastewater Pump (Drypit Non Clog)
Sewage/Wastewater Pump (Drypit Non Clog)

Design

  • End suction top discharge
  • Mounting: Horizontal
  • Stage: Single
  • Casing with hand hole inspection cover mechanical seal/ gland packing large free passage up to 200 mm
  • Grease lubricated antifriction bearing

Application

  • Municipal raw sewage transfer
  • Sewage treatment plants
  • Effluent treatment plants
  • Dirty water in industry
  • Sugar mills

Special features / product benefits

  • Mounting: Vertical
  • Delivery flange orientation
  • change possible
  • Bush bearing

Technical data

  • Qmax: 8000 m3/hr
  • Hmax: 70 m
  • Temperature: up to 70°C
  • Delivery Size: DN 50 – DN 800
Standard Horizontal Split Case Pump
Standard Horizontal Split Case Pump

Design

  • Mounting: Inline horizontal
  • Stages : Single/ double, single/ double suction Impellers shaft with sleeves
  • Grease lubricated anti-friction bearing
  • Mechanical seal/ gland packing

Application

  • Water supply / general industry
  • Building service / fire fighting
  • Spray irrigation / district heating

Special features / product benefits

  • Mounting: Vertical

Technical data

  • Qmax: m3/hr max 3400
  • Hmax: 235 m
  • Temperature: up to 120°C; Higher on request
  • Delivery Size: DN 50 – DN 400
PISO
MISO Wilo Pump

Design

  • Standards as per ISO 2858
  • End suction top discharge
  • Stage single
  • Back pullout design
  • Closed Impeller
  • Gland packing/Mechanical seal

Application

  • HVAC systems
  • Water transfer
  • Distribution systems
  • Fire fighting
  • Cooling tower

Special features / product benefits

Bearing Housing

  • Unique design for Grease & Oil Lubrication
  • Provisions for temperature gauge / vibration probe

Bearings

  • NR type replaced with standard type

Technical data

  • Qmax: 750 m3/hr
  • Hmax: 170 m
  • Temperature: -20ºC to 120ºC
  • Delivery Size: 32 – 200
Norm Pump as per EN733
Norm Pump as per EN733

Design

  • End suction top discharge
  • Mounting: Horizontal
  • Stage: Single
  • Back pullout design
  • Closed impeller
  • Mechanical seal/ gland packing
  • Grease lubricated antifriction bearings

Application

  • Building service
  • Sprinkler systems
  • Water supply
  • General industry

Special features / product benefits

Technical data

  • Qmax: 600 m3 /hr
  • Hmax: 150 m
  • Temperature: up to 1200C
  • Delivery Size: DN 32 – DN 150
Multistage Ring Section Pump
Multistage Ring Section Pump

Design

  • Mounting: Horizontal
  • Stages: 3 to 15
  • Radial flow impellers with vane diffusers mechanical seal/ gland packing
  • Grease lubricated antifriction bearings

Application

  • Mine dewatering
  • Descaling in steel mills
  • Boiler feed application
  • Reverse osmosis for desalination plants water supply / general industry
  • Fire fighting

Special features / product benefits

  • Mounting: Centreline/ vertical
  • Multi-outlet design
  • Balance valve design for axial thrust bush bearing/ roller bearing

Technical data

  • Qmax: 1000 m3/hr
  • Hmax: 1800m
  • Temperatur: up to 1600 C
  • Delivery Size: DN 32 – DN 250
MISO
MISO Wilo Pump

Design

  • Standards as per ISO 2858
  • End suction top discharge
  • Stage single
  • Back pullout design
  • Closed Impeller
  • Gland packing/Mechanical seal

Application

  • HVAC systems
  • Water transfer
  • Distribution systems
  • Fire fighting
  • Cooling tower

Special features / product benefits

Bearing Housing

  • Unique design for Grease & Oil Lubrication
  • Provisions for temperature gauge / vibration probe

Bearings

  • NR type replaced with standard type

Technical data

  • Flow: upto 750 m3/hr
  • Head: upto 170 m
  • Temperature: -20ºC to 120ºC
  • Delivery Size: 32 – 200
Engineered Horizontal Split Case Pump (HSC)
Engineered Horizontal Split Case Pump (HSC)

Design

  • Mounting: Inline horizontal
  • Stages: One/ two/ three stage single/ double suction impellers
  • Grease/ Oil lubricated antifriction bearings
  • Mechanical seal/ gland packing

Application

  • Water supply/ general industry
  • Ports & docks/ fire fighting
  • Irrigation/ marine desalination

Special features / product benefits

  • Mounting: Centre line/ vertical
  • Drive connection: direct/ cardan shaft bush bearing
  • Staggered vane design for fan pump application
  • Special suction/ delivery orientation* instrumentation & controls

Technical data

  • Qmax: m3/hr max 18000
  • Hmax: 270 m
  • Temperature: up to 120°C; Higher on request
  • Delivery Size: DN 50 – DN 400
End Suction Pump Engineered/ Special
End Suction Pump Engineered/ Special

Design

  • End suction top discharge
  • Mounting: Horizontal
  • Stage: Single
  • Back pullout design
  • Closed impeller
  • Mechanical seal/ gland packing grease/oil lubricated antifriction bearings

Application

  • Water supply/ general industry
  • Paper & pulp/ building service
  • Fire fighting/ irrigation/ sprinkler system
  • Treated effluent

Special features / product benefits

  • Mounting: Centreline/ vertical
  • Delivery flange orientation change possible
  • Bush bearing

Technical data

  • Qmax: 3400 m3/hr
  • Hmax: 220 m
  • Temperature: up to 120°C
  • Delivery Size: DN 50 – DN 400