Wilo-DrainLift XL

Design

Sewage lifting unit with 2 integrated pumps

Application

Sewage lifting unit for drainage of residential housing and commercial buildings (e.g. restaurants, department stores, etc.). Raw sewage that cannot be piped to the sewer system through the use of natural inclines and sewage from toilet systems below the backflow level are to be piped to the public sewer system by means of an automatic lifting unit in accordance with DIN EN 12056/ DIN 1986‐100. Sewage containing mineral oils or explosive admixtures must be guided through oil precipitators and/or petrol precipitators; those containing fatty substances must go through grease traps and those with sand through grit chambers. In cases where the flow to the lifting unit must not be interrupted during normal operation, one lifting unit must be equipped with a second pumping unit that has the same performance capacity and switches on automatically when needed (DIN EN 12050-1 A1).

Type key

Example: Wilo-DrainLift XL 2/25 (3~)
XL2 Double-pump system
/25 Max. delivery head [m]
(3~) 3~: Three-phase version

Special features/product advantages

  • Flexible thanks to height-adjustable and swivel-capable inlet connection
  • Easy use via a menu-operated switchgear
  • Integrated non-return valve
  • Operational reliability via high switching volumes and reliable level recording
  • Suitable for continuous duty (S1) with the use of self-cooling motors

Materials

  • Motor housing: Stainless steel 1.4404 (AISI 316L)
  • Hydraulics: PE/PUR plastic
  • Tank: PE plastic

Technical data

  • Mains connection 3~400 V, 50 Hz
  • Power consumption P1 from 3 to 5.3 kW, depending on type
  • Cable length from system to switchgear 4 m / plug cable 1.5 m
  • Operating mode S1 / S3 ‐ 60%
  • Fluid temperature max. 40 °C, for short periods up to 60 °C
  • Ambient temperature max. 40 °C
  • Free ball passage 40 mm
  • Pressure port DN 80
  • Inlet connection DN 100 / DN 150
  • Ventilation connection DN 70
  • Min. suction head (installation level to middle of inlet) 700 mm
  • Protection class (without switchgear) IP 67
  • Gross tank volume 380 l
  • Switching volume 260 l
00581306_0

Equipment/function

  • Thermal motor monitoring
  • Level control with level sensor
  • Potential-free contact
  • Switchgear with Zener barrier and mains-dependent alarm
  • Pump cable detachable
  • Inlet seal DN 150
  • Hole saw for inlet seal
  • Non-return flap valve
  • Hose connection for venting
  • Hose connection for diaphragm hand pump
  • Fixation material

Description/design

Fully submersible sewage lifting unit, ready for connection (flooding height: 2 mWS, overflow time: 7 days) with a collection tank that is impermeable to gas and water and that is equipped with a buoyancy safeguard. Centrifugal pump with vortex impeller.

DrainLift XL2:

Double-pump system for automatic operation (with automatic duty cycling, standby and peak-load operation). Due to the integrated double non-return valve, only one pressure pipe connection is required. Switchgear with CEE plug, potential-free contact, integrated and mains-dependent alarm. Pumps with integrated sheath current cooling.

Attention: The switchgear is not submersible and must therefore be arranged in such a way that it is overflow-proof.

Scope of delivery

Connection-ready sewage lifting unit, including:

  • Switchgear with mains-dependent alarm and plug
  • Zener barrier
  • 1x inlet seal DN 150
  • 1x hole saw for inlet connection DN 150
  • 1x collar for diaphragm hand pump connection
  • 1x collar for ventilation connection DN 70
  • 1x flange connector DN 80/100 with flat gasket, collar and fixing material for pressure connection DN 100
  • Fixation material
  • Installation and operating instructions